Hp Proliant Dl380 G7 Memory Slots

Buy HP Proliant DL380 G7 Server Online. Get HP DL380 G7 Server Includes Intel Xeon 5600 Series CPUs, DDR3 384GB RAM, 16 Hard Drives With 24TB. Get High-Performance, Customizable DL380 G7 Server With 1 Yr Warranty, 24/7 Tech Support & Instant Shipping All Over India-Delhi, Mumbai, Bangalore, Hyderabad, Chandigarh, Pune, Kolkata, Jaipur, Noida, Ahmedabad, Coimbatore. Hp proliant dl380 g7 ram slots Scoblete is the premier gaming writer in the world today.Here are just a few of the reasons why the game has gained so much popularity and why you should give it a try.One of the Mandatory requirement if you wish to visit these places is the hp proliant dl380 g7 ram slots ETA Canadian visa.

Print|Rate this content

Memory options

NOTE: Memory configurations listed do not apply to 'Factory Integrated Models'.

For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:

Click here to access the 'HPE Server Memory Configurator'.

Some Dual In-line Memory Module (DIMM) installation guidelines are summarized below:

  • For servers with eighteen (18) memory slots:

    • There are three (3) channels per processor; six (6) channels per server

    • There are three (3) DIMM slots for each memory channel; eighteen (18) total slots

    • Memory channel 1 consists of the three (3) DIMMs that are closest to the processor

    • Memory channel 3 consists of the three (3) DIMMs that are furthest from the processor

  • DIMM slots that are white should be populated first

  • Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs)

  • Do not install DIMMs if the corresponding processor is not installed

  • If only one processor is installed in a 2 CPU system, only half of the DIMM slots are available

  • To maximize performance, balance the total memory capacity between all installed processors

  • It is not required, but it is recommended to load the channels similarly if possible

  • User can only have up to eight (8) ranks installed per channel

  • When using quad-rank DIMMs, only 2 DIMMs can be installed per channel. The combinations are as follows: 2 quad-rank DIMMs,1 quad-rank DIMM + 1 dual-rank DIMM or 1 quad-rank DIMM + 1 single-rank DIMM

  • User can only install two quad-rank DIMMs per channel

  • User can only install two UDIMMs per channel; if available, the third slot in the channel must remain empty

  • Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel

  • Heaviest load (DIMM with most ranks) within a channel goes furthest from the chipset

  • For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically

  • For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired slots will be1,4; 2,5; 3;6 on a 3DPC system or 1,4; 2,5; on a 2DPC system

  • Low Voltage DIMMs can only be used with Intel Xeon processor 5600 series processors

  • If mixing DIMM voltage is a requirement, please note that the DIMMs will run at 1.5 V since all 1.35 V are capable of supporting1.5 V operations

DIMM Type
Unbuffered with Error Correcting Code (ECC)DIMMs (UDIMMs)
SingleRank(1R)
Quad Rank (4R)
Dual Rank (2R)
4GB
4GB
8GB
4GB
32GB
2GB
DIMM Native Speed(MHz)
1333
1066
1333
1066
1333
1333
LV/Std
Std
LV/Std
Std
LV
Std
SLOTS THAT CAN BE POPULATED
18
18
18
12
12
12
MAXIMUM CAPACITY (GB)
36
144
288
192
12
48
1 DIMM Per Channel
1333
1066
1333
1066
1333
1333
1333*
1333
1333*
800
800
1333
3 DIMM Per Channel
800
800
800**
n/a
n/a
n/a
  • *2DPC: LV runs at 1066, Std voltage runs at 1333

  • **3DPC: LV/Std voltage runs at 800

NOTE:
  • Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities

  • If user do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if the slowerDIMM is on the other processor

  • If user install 1x 1066 MHz DIMM in channel 1 and 1x 1333 MHz DIMM in channel 2, user still run at 1066 MHz

  • If user install 1x 1066 MHz DIMM in channel 1 and 5x 1333 MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the other channels,user run at 1066 MHz

  • If user install 3DPC in one channel (if applicable) and 1DPC in all other channels, user run at 800 MHz

  • References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc.

DIMM slot and configuration diagrams

Basic memory slot & population diagram

  • Population order; start with 'A' first, 'B' second, 'C' third, etc.

CPU1
slot #
slot #
Channel 1
G
G
2
2
3
3
Channel 2
H
H
5
5
6
6
Channel 3
I
I
8
8
9
9

Standard memory configuration (1 CPU model)

  • 6GB, consisting of three (3) 2GB dual-rank PC3-10600 RDIMMs

CPU2
population order
population order
1
1
Channel 1
D; empty
D; empty
A; 2GB DIMM
A; empty
4
4
Channel 2
E; empty
E; empty
B; 2GB DIMM
B; empty
7
7
Channel 3
F; empty
F; empty
C; 2GB DIMM
C; empty

Standard memory plus optional memory (1 CPU model)

  • 54GB, consisting of three (3) 2GB RDIMMs plus six (6) 8GB RDIMMs

    • 3x 2GB dual-rank PC3-10600 RDIMMs

    • 6x 8GB dual-rank PC3-8500 RDIMMs

CPU2
population order
population order
1
1
Channel 1
D; 8GB DIMM
D; empty
A; 2GB DIMM
A; empty
4
4
Channel 2
E; 8GB DIMM
E; empty
B; 2GB DIMM
B; empty
7
7
Channel 3
F; 8GB DIMM
F; empty
C; 2GB DIMM
C; empty

Standard memory replaced with optional memory (1 CPU model)

RDIMM maximum configuration

  • 72GB, consisting of nine (9) 8GB dual-rank PC3-8500 RDIMMs

CPU2
population order
population order
1
1
Channel 1
D; 8GB DIMM
D; empty
A; 8GB DIMM
A; empty
4
4
Channel 2
E; 8GB DIMM
E; empty
B; 8GB DIMM
B; empty
7
7
Channel 3
F; 8GB DIMM
F; empty

UDIMM maximum configuration (1 CPU model)

  • 12GB, consisting of six (6) 2GB dual-rank PC3-10600 UDIMMs

CPU2
population order
population order
1
1
Channel 1
D; 2GB DIMM
D; empty
A; 2GB DIMM
A; empty
4
4
Channel 2
E; 2GB DIMM
E; empty
B; 2GB DIMM
B; empty
7
7
Channel 3
F; 2GB DIMM
F; empty
C; 2GB DIMM
C; empty

Standard memory replaced with optional memory (2 CPU model)

RDIMM maximum configuration

  • 384GB, consisting of twelve (12) 32GB quad-rank PC3L-8500 RDIMMs

CPU2
population order
population order
1
1
Channel 1
D; 32GB DIMM
D; 32GB DIMM
A; 32GB DIMM
A; 32GB DIMM
4
4
Channel 2
E; 32GB DIMM
E; 32GB DIMM
B; 32GB DIMM
B; 32GB DIMM
7
7
Channel 3
F; 32GB DIMM
F; 32GB DIMM
C; 32GB DIMM
C; 32GB DIMM

UDIMM maximum configuration (2 CPU model)

24GB, consisting of twelve (12) 2GB dual-rank PC3-10600 UDIMMs

CPU2
population order
population order
1
1
Channel 1
D; 2GB DIMM
D; 2GB DIMM
A; 2GB DIMM
A; 2GB DIMM
4
4
Channel 2
E; 2GB DIMM
E; 2GB DIMM
B; 2GB DIMM
B; 2GB DIMM
7
7
Channel 3
F; 2GB DIMM
F; 2GB DIMM
C; 2GB DIMM
C; 2GB DIMM
NOTE: Capacity references are rounded to the common Gigabyte values.
  • 1GB = 1024MB

  • 2GB = 2048MB

  • 4GB = 4096MB

  • 8GB = 8192MB

  • 16GB = 16384MB

  • 32GB = 32768MB

Related documents for the product

Click here to view the list of available documents for product .

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!
  1. Was the information on this page helpful?
Please wait while we process your request.
Print|Rate this content

DDR3 memory population guidelines

NOTE: Memory configurations listed do not apply to Factory Integrated Models.

Click here to use Online DDR3 Memory Configuration Tool for detailed memory configuration rules and guidelines.

Some DIMM installation guidelines are summarized below:

  • For servers with eighteen (18) memory slots:

    • There are three (3) channels per processor; six (6) channels per server

    • There are three (3) DIMM slots for each memory channel; eighteen (18) total slots

    • Memory channel 1 consists of the three (3) DIMMs that are closest to the processor

    • Memory channel 3 consists of the three (3) DIMMs that are furthest from the processor

  • DIMM slots that are white should be populated first
  • Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs)
  • Do not install DIMMs if the corresponding processor is not installed
  • If only one processor is installed in a 2CPU system, only half of the DIMM slots are available
  • To maximize performance, balance the total memory capacity between all installed processors
  • It is not required, but it is recommended to load the channels similarly if possible
  • If any Quad rank DIMMs are installed, all channels are limited to only 2 DIMMs per channel.
  • You can only install two quad-rank DIMMs per channel
  • You can only install two UDIMMs per channel; if available, the third slot in the channel must remain empty
  • Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
  • Heaviest load (DIMM with most ranks) within a channel goes furthest from the chipset
  • For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically
  • For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired slotswill be 1,4; 2,5; 3;6 on a 3DPC system or 1,4; 2,5; on a 2DPC system
  • If mixing DIMM voltage is a requirement, please note that the DIMMs will run at 1.5V since all 1.35V are capable ofsupporting 1.5V operations
DIMM Type
Unbuffered with ECC DIMMs(UDIMMs)
SingleRank (1R)
Quad Rank (4R)
Dual Rank (2R)
4GB
4GB
8GB
16GB
2GB
DIMM Native Speed(MHz)
1333
1067
1067
1333
1333
LV/Reg
Reg
LV/Reg
Reg
Reg
Slots that can be populated
18
18
18
12
12
Maximum capacity (GB)
36
144
48
12
48
1 DIMM Per Channel
1333
1067
1067
1333
1333
13331
13331
13331
800
1333
3 DIMM Per Channel
800
800
n/a
n/a
n/a
NOTE:
  1. supported with ROM update via ROM Based Setup Utility (RBSU). UDIMM support is only on 12-slot servers
NOTE:
  • Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities
  • If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if theslower DIMM is on the other processor
  • If you install 1x 1066 MHz DIMM in channel 1 and 1x 1333 MHz DIMM in channel 2, you still run at 1066MHz
  • If you install 1x 1066 MHz DIMM in channel 1 and 5x 1333 MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the otherchannels, you run at 1066 MHz
  • If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800 MHz
  • 95 Watt CPU's are required for 1333MHz DIMM speeds. All other CPU's are capable of up to 1067 MHz
  • References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc.

Basic memory slot and population diagram

NOTE: Population order; start with 'A' first, 'B' second, 'C' third, etc.
CPU2
slot #
slot #
Chnl 1
1
1
2
2
3
3
4
4
Chnl 2
E
E
B
B
7
7
Chnl 3
F
F
C
C

Standard memory configuration (1 CPU model)

NOTE: 6GB, consisting of three (3) 2GB dual-rank PC3-10600 RDIMMs
CPU1
population order
population order
Chnl 1
G; empty
G; empty
D; empty
D; empty
A; 2GB DIMM
A; empty
Chnl 2
H; empty
H; empty
5
5
6
6
Chnl 3
I; empty
I; empty
8
8
9
9

Standard memory plus optional memory (1 CPU model)

NOTE:
  • 54GB, consisting of three (3) 2GB RDIMMs plus six (6) 8GB RDIMMs
    • 3x 2GB dual-rank PC3-10600 RDIMMs
    • 6x 8GB dual-rank PC3-8500 RDIMMs
CPU1
population order
population order
1
1
Chnl 1
D; 8GB DIMM
D; empty
A; 2GB DIMM
A; empty
4
4
Chnl 2
E; 8GB DIMM
E; empty
B; 2GB DIMM
B; empty
7
7
Chnl 3
F; 8GB DIMM
F; empty
C; 2GB DIMM
C; empty

Standard memory replaced with optional memory (1 CPU model)

RDIMM maximum configuration (1 CPU model)

NOTE: 96GB, consisting of six (6) 16GB quad-rank PC3-8500 RDIMMs
CPU1
population order
population order
1
1
Chnl 1
D; 16GB DIMM
D; empty
A; 16GB DIMM
A; empty
4
4
Chnl 2
E; 16GB DIMM
E; empty
B; 16GB DIMM
B; empty
7
7
Chnl 3
F; 16GB DIMM
F; empty
C; 16GB DIMM
C; empty

UDIMM maximum configuration (1 CPU model)

NOTE: 12GB, consisting of six (6) 2GB dual-rank PC3-10600 UDIMMs
CPU1
population order
population order
1
1
Chnl 1
D; 2GB DIMM
D; empty
A; 2GB DIMM
A; empty
4
4
Chnl 2
E; 2GB DIMM
E; empty
B; 2GB DIMM
B; empty
7
7
Chnl 3
F; 2GB DIMM
F; empty
C; 2GB DIMM
C; empty

Standard memory replaced with optional memory (2 CPU model)

RDIMM maximum configuration (2 CPU model)

NOTE: 192GB, consisting of twelve (12) 16GB quad-rank PC3-8500 RDIMMs
CPU1
population order
population order
1
1
Chnl 1
D; 16GB DIMM
D; 16GB DIMM
A; 16GB DIMM
A; 16GB DIMM
4
4
Chnl 2
E; 16GB DIMM
E; 16GB DIMM
B; 16GB DIMM
B; 16GB DIMM
7
7
Chnl 3
F; 16GB DIMM
F; 16GB DIMM
C; 16GB DIMM
C; 16GB DIMM

UDIMM maximum configuration

NOTE: 48GB, consisting of twelve (12) 4GB dual-rank PC3-10600 UDIMMs
CPU1
population order
population order
1
1
Chnl 1
D; 4GB DIMM
D; 4GB DIMM
A; 4GB DIMM
A; 4GB DIMM
4
4
Chnl 2
E; 4GB DIMM
E; 4GB DIMM
B; 4GB DIMM
B; 4GB DIMM
7
7
Chnl 3
F; 4GB DIMM
F; 4GB DIMM
C; 4GB DIMM
C; 4GB DIMM
NOTE: Capacity references are rounded to the common Gigabyte values.
  • 1GB = 1024MB
  • 2GB = 2048MB
  • 4GB = 4096MB
  • 8GB = 8192MB
  • 16GB = 16384MB

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.

Hp Proliant Dl380 G7 Memory Slots

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!
  1. Was the information on this page helpful?

Hp Proliant Dl380 G7 Memory Slots Free

Please wait while we process your request.